Imet XT5 Automatic Bandsaw

Imet XT5 Automatic Enclosed BandsawThe XT range is born from years of in-depth research which has ultimately lead to the development of a highly compact unit with no compromise on quality. This sleek, innovative machine has been designed with operator safety being of paramount importance, so at first glance it can appear to be a completely inaccessible. However, on closer inspection of the XT4, the operator is able to access all areas very quickly via specially developed opening systems on either side of the machine. This is a new breed of machine, with industry 4.0 connection option for smart factories of the future. See the options tab for more information.Machine FeaturesClamping vices move at the same time to ensure optimum clamping of the material. Also bars which are not completely straight can advance through the system without issue and all vice pressures are adjustable. This system lets the vices move back. This helps prevent the blade from rubbing against the cut surface when the saw frame rises for the next cut.High performance TCT bandsaw blades are suitable for this machine and it features hydraulically pressured TCT blade guides for maximum precision and squareness of cut.Lateral roller bearings take the blade twist load prior to entry into these guides and are adjustable.

The moving guides are automatically positioned close to the cutting area, again, for maximum precision.Options for short batch and one-off sawing allow for partial cuts in the material during an automatic cycle.Hydraulic unit equipped with a variable-capacity pump.The sawblade is tensioned by a hydraulic cylinder controlled by the machine software.Automatic Trim Cut option, if  the material has an acceptable pre-sawn face, it will be accurately & automatically located relative to the blade ‘zero’ position.This feature saves time and cuts down on material wastage. Each time the blade is changed, the machine automatically performs a run-in procedure, reducing the cutting descent speed by up to 30%,for a set time recommended by the blade manufacturer.The software allows to memorize up to 99 cutting programs with different cutting lengths and quantity’s, these programs can be personalised and easily used.Blade thickness is automatically detected as well as the automatic feeder stroke.The material length needed to complete the cutting program is displayed when the material sizes and quantities have been programmed. All operating functions of the machine, errors and problem solving messages are clearly displayed.A device for checking the accuracy/ squareness of the cut, with automatic adjustment or stopping of the saw frame descent speed in the event of blade deviation.Machine feeder electrically driven with recirculating-ball screw controlled by a sensor; automatic reset; the weight of the bar is supported by the roller table and not by the feeder, assuring a higher precision with the passing of time and lesser wearing down of the moving parts. TechnicalXT5Cutting area90°Cutting capacity at 90°Round: 460mm Squared: 460mm Rectangular: 460x460mmCapacity with bundle cutting450x450mm 90x10mm Scrap-end with bundle 210mmMinimum scrap-end60mm ((available in option: 30mm)Minimum cutting diameter20mmBlade size6100x54x1.3mm (in optional blade h 41 mm, thickness 1.3 mm)Blade inclination0°Blade motor power5.5KWBlade speed15÷150 m/minSaw frame transmissionBrushless 1/9 6Nm low backlash planetaryFeeder motorBrushless 1/25 6Nm low backlash planetaryFeeder length500 mmHydraulic unit power2.2KWHydraulic unit tank capacity60lCo0lant tank capacity100lWeight3500kgMachine size .2800x1777x2200mmMinimum cutting length10 mmWorking table height870mmChips conveyor height420mm